1. Honda CR-V
  2. Owner info
  3. Oil Capacity
  4. 2011

2011 Honda CR-V Oil Capacity

The 2011 Honda CR-V with the K24Z6 engine has an oil capacity of 4.4 qt and uses 0W-20 oil. These figures identify the listed engine’s capacity and oil grade; they are not a substitute for checking the oil level after service. Follow the owner’s manual for the recommended oil-change procedure and level check.

The listed facts apply to the K24Z6 engine. If your CR-V has a different engine or trim, do not assume the same capacity or oil grade applies; confirm the correct specifications in the owner’s manual. A separate figure for your vehicle is not listed here, so confirm it in the manual rather than relying on an estimate.

Oil capacity can refer to the amount used during an oil change, and the amount needed may vary with the service performed. Add oil carefully and check the dipstick as directed in the manual. If you need a specification that is not listed here, confirm it in the owner’s manual.

4.4 qt · 0W-20 (K24Z6)

Catalog dataManufacturer figures stored on configuration rows

  • 4.4 qt · 0W-20 · K24Z6

Questions

Does oil capacity vary by engine?
Stored oil capacity is the same across engine groups in this extract.
How much oil is stored for each engine?
K24Z6: 4.4 qt

Catalog oil filters

Catalog year/make/model rows for 2011 Honda CR-V.

Viscosity and filter part numbers appear only when the catalog stores them. This is not an oil-change procedure.

Catalog fitment does not by itself prove OEM-equivalent compatibility.